BMW S 1000RR Rider's Manual page 50

ABS Pro failure
3
ABS indicator and warning
light lights up.
48
ABS Pro failure! On-
ward journey possi-
ble. Ride carefully to
next specialist workshop.
Possible cause:
The ABS Pro control unit has
detected a fault. The ABS Pro
z
function is not available. The
ABS function remains available.
ABS only supports braking in
straight-ahead riding.
It remains possible to con-
tinue riding. Take note of ad-
ditional information on spe-
cial situations that can lead
to an ABS Pro fault message
( 155).
Have the malfunction corrected
as soon as possible at an
authorized specialist workshop,
preferably an authorized
BMW Motorrad retailer.
DTC intervention
DTC indicator and warning
light flashes quickly.
The DTC has detected impend-
ing instability at the rear wheel
and responded by reducing the
torque. The indicator and warn-
ing light flashes longer than the
DTC intervention lasts. This fea-
ture continues to furnish the rider
with visual feedback confirm-
ing that the system has initiated
active closed-loop intervention
even after the critical situation
has passed.
DTC self-diagnosis not
completed
DTC indicator and warning
light flashes slowly.
Possible cause:
DTC self-diagnosis not
completed
The DTC function is not
available as the self-diagnosis
function has not been
completed. (To check wheel
speed sensors, the motorcycle
must reach a minimum speed
with engine running: min
3 mph (min 5 km/h))
Ride off slowly. It must be
noted that the DTC function
is not available until the self-
diagnosis has been completed.
DTC switched off
DTC indicator and warning
light lights up.
Off!