Polymobil Iii Start-Up Report - Siemens POLYMOBIL III Start-Up Instructions

Start-up report

POLYMOBIL III Start-up report

The Start-up report is arranged analogously to these Start-up instructions.
Article number / type number / serial number: . . . . . . . . . . . . . . . .
Customer: . . . . . . . . . . . . . . . . . . . . Customer number: . . . . . . . . . . . . . . .
1. Check of the nominal line voltage . . . . . . . . . .V
2. Adaptation of the nominal line voltage at > 240 V
3. Checking the control and display elements
4. Checking the weight counterbalance
5. Checking the control elements on the double slot diaphragm.
6. Checking the exposure release with high-voltage
7. Coincidence of light field and radiation field
8. Checking the exposure switch-off.
9. Protective conductor test
(measured values in separate report
'Protective conductor resistance / report')
10. Device leakage current measurement
(measured values in separate report
'Device leakage current / report')
Date: . . . . . . . . . . . . . .
Siemens AG
Medical Solutions
Instrument type:
Serial No.:
Calibrated up to:
Σ
X: . . . . . . . . . . . cm
Σ
Y: . . . . . . . . . . . cm
RXB8-115.034.02
Rev. 03 04.05
AC
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
on T1
AC
n.a.
Engineer . . . . . . . . . . . . . . . .
Page 1 of 2
CS PS 24
6 - 1
6
6
ok
ok
ok
ok
ok
ok
ok
ok
ok
POLYMOBIL III