Protective Conductor Connection And Shield Support - Siemens SINAMICS Series Operating Instructions Manual

Hide thumbs Also See for SINAMICS Series:

Table of Contents

Additional system components

7.5 Terminal Module TM31

Protective conductor connection and shield support

It is always advisable to shield the digital input/output wiring.

The following diagrams show typical Weidmüller shield connection terminals for the shield

Damage or faulty operation due to incorrect shielding or inadmissible cable lengths

If the correct shielding procedures and the permissible cable lengths are not observed, the

machine can be damaged or may malfunction.

• Only use shielded cables.

• Do not exceed the cable lengths stated in the technical data.

Shield connection terminal, Weidmüller company, type: KLBUE CO1,

Article number: 1753311001

Protective conductor connection M4 / 1.8 Nm

Shield supports

SINAMICS DCM DC Converter

Operating Instructions, 12/2018, A5E34763375A