Siemens SINAMICS Series Operating Instructions Manual page 336

Commissioning
8.7 Commissioning optional additional modules
8.7.3.2 Adding offline in STARTER
In Starter, CBE20 is added when working through the drive wizard.
Figure 8-43 Activating the CBE20 option module
● Select the option module CBE20.
● Work through the wizard up to the end and load the expanded project into the drive.
● You can then access the parameters for the CBE20.
334
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A