Dimension Drawing; Installation - Siemens SINAMICS Series Operating Instructions Manual

Hide thumbs Also See for SINAMICS Series:

Table of Contents

Dimension drawing

1. Tilt the component backwards slightly and attach it to the DIN rail using the hooks.

2. Swivel the component onto the DIN rail until you hear the mounting slide at the rear latch

into position.

3. Slide the components along the mounting rail to either the left or right up to their final

SINAMICS DCM DC Converter

Operating Instructions, 12/2018, A5E34763375A

Dimension drawing of Terminal Module TM15, all data in mm and (inches)

Additional system components

7.4 Terminal Module TM15