Siemens SINAMICS Series Operating Instructions Manual page 475

Hide thumbs Also See for SINAMICS Series:

Table of Contents

1. Select a slave (e.g. SINAMICS DCM) and use its properties to configure the telegram for

the connected drive object.

2. In the "Configuration" tab of the drive unit, select e.g. the standard telegram 1 for the

associated drive in the telegram selection.

Figure 10-20 Telegram selection for drive object

SINAMICS DCM DC Converter

Operating Instructions, 12/2018, A5E34763375A

Descriptions of functions

10.4 Communication via PROFIBUS DP