Commissioning
8.5 Commissioning with the STARTER commissioning tool
Figure 8-9
⇒ Click PG/PC... and set up the interface according to your device configuration.
Buttons Properties..., Diagnostics... and Copy... are now available.
Set S7ONLINE as access point.
Note
Connection via PROFINET IO with CBE20
To establish the connection via the additional module CBE20, see Chapter "Activating online
mode: STARTER via PROFINET IO (Page 485)".
292
Setting up the interface
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A