Product Name - Siemens SINAMICS Series Operating Instructions Manual

Preface
Note
Information on connecting the unit
The inside front cover of the SINAMICS DC MASTER Operating Instructions contains a
summary of the key information required for connecting the unit.

Product name

The SINAMICS DCM documentation uses the following product names:
● SINAMICS DCM
● SINAMICS DC MASTER
Device firmware version
As these Operating Instructions went to print, SINAMICS DCM converters were being
supplied from the factory with the firmware release specified on the inside front page.
However, these Operating Instructions can, in principle, also apply to other firmware
versions.
● Older firmware versions:
It is possible that not all of the functions described here are actually available.
● Newer firmware versions:
It is possible that SINAMICS DCM may feature additional functions that are not described
in these Operating Instructions. Do not change any parameters that you cannot find in the
List Manual from their factory setting, and do not give parameters any values that are not
specified in the List Manual.
The firmware version is displayed using r50060[6].
Example:
01010203 displayed on the BOP20 means 01.01.02.03 → Version 1.1, Service Pack 2,
Hotfix 3
When required, you can obtain the current firmware from your local Siemens sales office.
Download of the current firmware version for registered users
(https://support.industry.siemens.com/cs/ww/en/view/44029688)
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A
3