Mill Open Slot - Cycle899 - Siemens SINUMERIK 840D sl Programming Manual

No. Param Param
mask internal
_DMODE
28
_AMODE
29
18.1.22

Mill open slot - CYCLE899

Programming
CYCLE899(REAL _RTP, REAL _RFP, REAL _SDIS, REAL _DP, REAL _LENG,
REAL _WID, REAL _PA, REAL _PO, REAL _STA, REAL _MID, REAL _MIDA,
REAL _FAL, REAL _FALD, REAL _FFP1, INT _CDIR, INT _VARI, INT _GMODE,
INT _DMODE, INT _AMODE, INT _UMODE, REAL _FS, REAL _ZFS)
Parameters
No. Param Param
mask internal
1 RP _RTP
2 Z0 _RFP
3 SC _SDIS
Z1 _DP
4
L _LENG
5
6 W _WID
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Explanation
Display mode
UNITS: Machining plane G17/18/19
0 = Compatibility, the levels effective before cycle call remain active
1 = G17 (only active in the cycle)
2 = G18 (only active in the cycle)
3 = G19 (only active in the cycle)
TENS: Reserved
HUNDREDS: Reserved
THOUSANDS: Software version identification
1 = SLOT2 functions as of software version 2.5
Alternative mode
UNITS: Final depth Z1 (abs/inc)
0 = Compatibility
1 = Z1 (inc)
2 = Z1 (abs)
TENS: Reserved
HUNDREDS: Insertion depth for chamfering ZFS
0 = ZFS (abs)
1 = ZFS (inc)
Explanation
Retraction plane (abs)
Reference point of tool axis (abs)
Safety clearance (to be added to reference point, enter without sign)
Slot depth (abs/inc), see _AMODE
Length of slot (inc)
Width of slot (inc)
Programming cycles externally
18.1 Technology cycles
677