Fast Retraction From The Contour (Setint Liftfast, Alf) - Siemens SINUMERIK 840D sl Programming Manual

1.14.6

Fast retraction from the contour (SETINT LIFTFAST, ALF)

Function
For a
from the workpiece contour using fast retraction.
The further sequence is then dependent on whether the
interrupt routine in addition to
With interrupt routine:
Without interrupt routine:
Syntax
SETINT(<n>) PRIO=1 LIFTFAST
SETINT(<n>) PRIO=1 <NAME> LIFTFAST
Meaning
SETINT(<n>)
<n>:
PRIO=
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
statement with
SETINT LIFTFAST
After the fast retraction, the interrupt routine is executed.
Machining is stopped after fast retraction and an alarm is output.
: Command: Assign input <n> to an interrupt routine. The assigned interrupt
routine starts when input <n> switches.
Parameter: Input number
Type:
Range of values:
: Defining the priority
, when the input is switched, the tool is moved away
:
LIFTFAST
INT
1 ... 8
Flexible NC programming
1.14 Interrupt routine (ASUB)
statement includes an
SETINT
127