To Open An Existing Diagram; Yf Software Diagrams; Yd Hardware Diagrams - Siemens TXP-CLC Manual

To open an existing diagram, click on Diagram then Open as below:
Diagram
Create
- +
Open
X
G
Save
Close
Save&Close
Reload
Print ...
open signals
Select one diagram
and press "load"
In the first window the diagram ID code is entered or Unix wild cards * and ? can be used to
create a list in a second mask. The document type code can also be selected here
according to the table below:

YF software diagrams

YFH overview software diagram
YFM overview for closed and open loop controls
YFR software diagrams (logics)

YD hardware diagrams

YDH topology diagram
YDM cabinet diagram
YDR modules diagram
4
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
YFH
YFM
YFR
YDH
YDM
YDR
YOP
*
YOP log diagrams for OM
YX
*
Training Center
wiring diagrams
all types
TXP CLC Course