Curve Tables: Check Use Of Resources (Ctabno, Ctabnomem, Ctabfno, Ctabsegid, Ctabseg, Ctabfseg, Ctabmseg, Ctabpolid, Ctabpol, Ctabfpol, Ctabmpol) - Siemens SINUMERIK 840D sl Programming Manual

11.2.7 Curve tables: Check use of resources (CTABNO, CTABNOMEM, CTABFNO,
CTABSEGID, CTABSEG, CTABFSEG, CTABMSEG, CTABPOLID, CTABPOL,
CTABFPOL, CTABMPOL)
Function
The programmer can use these commands to obtain up-to-date information about the use of
resources for curve tables, table segments, and polynomials.
Syntax
CTABNO
CTABNOMEM(<memory location>)
CTABFNO(<memory location>)
CTABSEGID(<n>,<memory location>)
CTABSEG(<memory location>,<segment type>)
CTABFSEG(<memory location>,<segment type>)
CTABMSEG(<memory location>,<segment type>)
CTABPOLID(<n>)
CTABPOL(<memory location>)
CTABFPOL(<memory location>)
CTABMPOL(<memory location>)
Meaning
CTABNO
CTABNOMEM
CTABFNO
CTABSEGID
CTABSEG
CTABFSEG
CTABMSEG
CTABPOLID
CTABPOL
CTABFPOL
CTABMPOL
<n>
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Determine total number of defined curve tables (in the static and the
dynamic NC memory)
Determine the number of defined curve tables in the specified
location>
Determine the number of curve tables remaining possible in the
specified
<memory location>
Determine the number of curve segments of the specified
used by curve table number
type>
Determine the number of curve segments of the specified
used in the specified
type>
Determine the number of curve segments of the specified
remaining possible in the specified
type>
Determine the maximum possible number of curve segments of the
specified
<segment type>
Determine the number of curve polynomials used by curve table
number
<n>
Determine the number of curve polynomials used in the specified
<memory location>
Determine the number of curve polynomials remaining possible in the
specified
<memory location>
Determine the maximum possible number of curve polynomials in the
specified
<memory location>
Number (ID) of curve table
11.2 Curve tables (CTAB)
<n>
<memory location>
<memory location>
in the specified
<memory location>
Axis couplings
<memory
<segment
<segment
<segment
517