Axis couplings
11.3 Axial master value coupling (LEADON, LEADOF)
<memory location>
<segment type>
11.3
Axial master value coupling (LEADON, LEADOF)
Note
This function is not available for SINUMERIK 828D!
Function
With the axial master value coupling, a leading and a following axis are moved in
synchronism. It is possible to assign the position of the following axis via a curve table or the
resulting polynomial uniquely to a position of the leading axis – simulated if necessary.
518
Specification of memory location (optional)
"SRAM"
Static NC memory
"DRAM"
Dynamic NC memory
Note:
If a value is not programmed for this parameter, the default memory
location set with MD20905 $MC_CTAB_DEFAULT_MEMORY_TYPE
is used.
Specification of segment type (optional)
"L"
Linear segments
"P"
Polynomial segments
Note:
If no value is programmed for this parameter, the sum of the linear
and polynomial segments is output.
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Job Planning