Siemens SINUMERIK 840D sl Programming Manual page 353

Description
Cylinder surface transformation without groove wall correction
The controller transforms the programmed traversing movements of the cylinder coordinate
system to the traversing movements of the machine axes:
● Rotary axis (Y / CM)
● Infeed axis vertical to the axis of rotation (XM)
● Longitudinal axis parallel to the axis of rotation (ZM)
The linear axes are positioned perpendicular to one another.
XM
Z / ZM
Y / CM
ASM
Figure 6-2
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Infeed axis perpendicular to the turning center
Linear axis parallel to the turning center
Y axis of the transformation/rotary axis
Working spindle
Cylinder surface transformation without groove wall correction
Transformations
6.8 Kinematic transformation
353