Row Of Holes - Holes1 - Siemens SINUMERIK 840D sl Programming Manual

No. Param Param
mask
intern
15 X6 _X6
16 Y6 _Y6
17 X7 _X7
18 Y7 _Y7
X8 _X8
19
Y8 _Y8
20
21 _VARI
22 _UMODE
23 _DMODE
Note
Positions that are not required for parameters X1/Y1 to X8/Y8 can be ignored.
The alternative values for _XA and _YA, however, must be provided in full for all 9 positions.
18.1.11

Row of holes - HOLES1

Programming
HOLES1(REAL SPCA, REAL SPCO, REAL STA1, REAL FDIS, REAL DBH, INT
NUM, INT _VARI, INT _UMODE, STRING[200] _HIDE, INT _NSP, INT _DMODE)
Parameters
No. Param Param
mask
internal
1 X0 SPCA
Y0 SPCO
2
3 α0 STA1
4 L0 FDIS
5 L DBH
6 N NUM
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Explanation
7th position X
7th position Y
8th position X
8th position Y
9th position X
9th position Y
Reserved
Reserved
Display mode
UNITS: Machining plane G17/18/19
0 = Compatibility, the plane effective before cycle call remains active
1 = G17 (only active in the cycle)
2 = G18 (only active in the cycle)
3 = G19 (only active in the cycle)
Explanation
Reference point for row of holes along the 1st axis (abs)
Reference point for row of holes along the 2nd axis (abs)
Basic angle of rotation (angle to 1st axis)
Distance from 1st hole to reference point
Spacing between the holes
Number of holes
Programming cycles externally
18.1 Technology cycles
657