Diagnostic Tables For Check I/O - Siemens Climatix Series Basis Document

Example 1
Example 2
Analog inputs
Name
Temperature supply
Temperature room 1
Temperature rum 2
Temperature return
Temperature out
Temperature frost
Temperature water recovery
Temperature exhaust
Temperature supply after recovery
Temperature supply Extra seq.
Temperature frost Extra heat
232 / 244
Basis Document Siemens Climatix Control System
Siemens
Page 232
BDCX.100820.01GB
Building Technologies
20.2

Diagnostic tables for check I/O

The clear text from the following tables cannot be configured, but is required for a
function as well as determining if inputs or outputs are occupied in duplicate.
1rst notconf IO Pos = 82 => Input external control 2 is not assigned an input
(Nusd).
Caution: The plant is locked against switch on!
Doubled config I/O = Yes
Doubled config I/Os = 82
Doubled conf I/O pos = DI3
Inputs External contrl 1 and 2 were assigned the same output DI3.
Caution: The plant is locked against switch on!
Type Position
(IO
Check)
AI 1
AI 2
AI 3
AI 4
AI 5
AI 6
AI 7
AI 8
AI 9
AI 10
AI 11
Standard application AHU
Appendices
81
Name
Temperature Aux
Pressure supply
Pressure return
Flow supply
Flow return
Pressure over recovery
Humidity supply
Humidity room
Humidity out
Air quality
External setpoint
Type Position
(IO
Check)
AI 12
AI 21
AI 22
AI 23
AI 24
AI 25
AI 31
AI 32
AI 33
AI 35
AI 36
CE1P3977en_02
01.02.2010