Flex I/O Card Port Module Srx-Ioc-16Ge-Tx - Juniper SRX5400 Manual

Serial Number Location
Related
Documentation

Flex I/O Card Port Module SRX-IOC-16GE-TX

Description
Software release
Cables and connectors
Controls
Supported Slots
Weight
Copyright © 2014, Juniper Networks, Inc.
The serial number label is located as shown in
Figure 22: Port Module SRX-IOC-16GE-SFP Serial Number Label
Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 4
Flex I/O Card (SRX5K-FPC-IOC) on page 28
You use port modules and Flex I/O Cards (Flex IOCs) to add different combinations of
small form-factor pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and
copper ports to your services gateway to suit the specific needs of your network. The
SRX-IOC-16GE-TX port module
sixteen 10/100/1000 Ethernet RJ-45 copper ports.
Figure 23: Flex IOC Port Module SRX-IOC-16GE-TX
Port module with sixteen 10/100/1000 Ethernet RJ45 ports
Maximum throughput: 10 Gbps
Oversubscription ratio: 1.6:1
Maximum configurable MTU: 9192 bytes
Junos OS Release 9.5R1 and later
Sixteen RJ-45 1-Gbps ports
Button–The
ONLINE ONLINE
online and offline.
Either slot in SRX5K-FPC-IOC Flex IOC
Approximately 1.6 lb (0.7 kg)
Flex I/O Card Port Module SRX-IOC-16GE-TX
Figure 22 on page
Serial number
ID label
JX0123
(Figure 23 on page 31) installs into a Flex IOC to add
button on the port module front panel toggles the port module
31.
31