Flex I/O Cards And Port Modules; Flex I/O Card (Srx5K-Fpc-Ioc) - Juniper SRX5400 Manual

SRX5400, SRX5600, and SRX5800 Services Gateway Card Reference
Related
Documentation

Flex I/O Cards and Port Modules

Flex I/O Card (SRX5K-FPC-IOC)

Description
Software release
28
Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 4
Modular Port Concentrator (SRX5K-MPC) on page 18
Flex I/O Card (SRX5K-FPC-IOC) on page 28
Flex I/O Card Port Module SRX-IOC-16GE-SFP on page 30
Flex I/O Card Port Module SRX-IOC-16GE-TX on page 31
Flex I/O Card Port Module SRX-IOC-4XGE-XFP on page 32
The SRX5K-FPC-IOC Flex I/O card (Flex IOC)
slots that accept port modules that add Ethernet ports to your services gateway. A Flex
IOC with installed port modules functions in the same way as a regular IOC, but allows
greater flexibility in adding different types of Ethernet ports to your services gateway.
Each Flex IOC has a processor subsystem, which includes a 1.2-GHz CPU, a system
controller, 1 GB SDRAM, and two Packet Forwarding Engines with a maximum throughput
of 10 Gbps each.
You must install at least one IOC in the services gateway. The IOC can be of any of the
available IOC or Flex IOC types.
You can install Flex IOCs in any of the slots that are not reserved for Switch Control
Boards (SCBs). If a slot is not occupied by a card, you must install a blank panel to shield
the empty slot and to allow cooling air to circulate properly through the services gateway.
Figure 19: Flex IOC with Typical Port Modules
Flex IOC
4x10GE-XFP
port module
in slot 0
16x1GE-TX
port module
in slot 1
Flex IOC with slots for two port modules
Junos OS Release 9.5R1 and later
(Figure 19 on page 28) is an IOC with two
Copyright © 2014, Juniper Networks, Inc.