Xerox VersaLink B7025 Service Manual page 1334

Interlock - Finisher Side Interlock
An option switch is used to detect when the booklet maker is installed on the finisher. This
Interlock is located on the Finisher LX, not the booklet maker.
When Interlocks are open, power is removed and an error message displays on the UI. Refer
to Figure 34.
Figure 34 Finisher side interlock
Stapler Assembly
The booklet maker contains two staple assemblies which support and staple compiled booklets
prior to ejecting into the stacker tray.
Each staple assembly contains a staple module and an exit sub chute. The staple units are
mounted on a carriage rail. Refer to Figure
Product Technical Overview
Option
switch
35.
Figure 35 Stapler assemblies
Carriage rail
April 2017
8-88 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Stapler assemblies
Stapler
Exit sub-chute
assemblies
Figure 36 Components
Launch Issue