Print Data (Target) - Konica Minolta CM-26dG Instruction Manual

„ Print Data (Target)
Print the target data. The instrument must be connected to the serial printer in advance. For instructions on how
to connect the instrument to a serial printer, refer to P.119 "Printer Connection".
Notes
• Display the target to be printed on the <Target> screen in advance.
• If a proper connection is not established, printing will not be possible.
• Even if the printer is connected correctly, printing may not be possible under some circumstances, such as if
the printer is turned OFF when printing.
Operating Procedure
1
Use [▲] or [▼] to move the cursor to "Print data",
and press the [Confirmation] key to display the
<Print data> screen. Printing will begin from the
connected printer.
When the printing is complete, the screen returns to the
<Target> screen.
Notes
The <Print data> screen is displayed even when data will
not be printed properly due to an improper printer
connection or other problem.
61
Start the procedure from the <Target menu> screen.