X85; Change List Position - Konica Minolta CM-26dG Instruction Manual

… Change list position

„
Specifying sample numbers allows for specified sample to be selected without the need to scroll the screen.
Setting Procedure
1
Use [▲] or [▼] to move the cursor to "Change list
position", and then press the [Confirmation] key.
The <Change list position> screen is displayed.
2 ▲ and ▼ will be displayed above and below the data
number. Use [▲] or [▼] to specify a value. Use [◀]
or [▶] to move between digits.
3
Press the [Confirmation] key.
The selection is confirmed and the screen returns to the
<Sample> screen.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Data management> screen.
Notes
Numbers with no measurement data cannot be selected.
Start the procedure from the <Sample menu> - <Data management> screen.
2
56