Calibration Stage
CM-26dG
CM-26d
①
⑤ ③ ②
① Cap
② Zero calibration hole
③ White calibration plate
④ Gloss calibration plate
(CM-26dG only)
⑤ Target mask holder
(CM-26d only)
19
①
④
③
This black cap is used to protect the white calibration plate and the
gloss calibration plate.
Notes
Attach the cap to the white calibration plate and the gloss
calibration plate when they are not being used.
Only one cap for the white calibration plate is included with the
Memo
CM-26d/CM-25d.
Used to perform zero calibration.
Make sure no dust gets into the zero calibration hole.
Used to perform white calibration. When the plate is not being used,
use the lid to prevent the plate from becoming dusty or scratched and
to protect it from external light.
Used to perform gloss calibration. When the plate is not being used,
use the lid to prevent the plate from becoming dusty or scratched and
to protect it from external light.
Used to store unused target masks.
②
CM-25d
①
③ ②