X85; Annual Calibration Messages - Konica Minolta CM-26dG Instruction Manual

… Annual Calibration Messages

„
As the time for periodic calibration approaches, the instrument shows a message reading "Regularly scheduled
device calibration is required. Please contact the nearest service center." at start-up to recommend annual service
recalibration.
The annual calibration message can be set to be shown or to be hidden when the recommended recalibration time
comes.
Notes
Regardless of displaying annual calibration message, it is recommended to request regular calibration
through our service department.
Memo
Display of the annual calibration message is set to "ON (Display)" when the instrument is shipped from the factory.
Operating Procedure
1
Press [MENU].
The <Annual calibration> screen is displayed.
Settings
{ OFF : The message about annual calibration will not be
displayed.
{ ON : The message about annual calibration will be
displayed.
2
Use [◀] or [▶] to move the cursor to select "OFF" or
"ON".
Memo
If the annual calibration notification message is set to ON,
the annual calibration message will be displayed as the
specified day nears. The date of the next calibration is
specified upon initial startup or during KONICA MINOLTA
calibration service (or maintenance) and cannot be changed.
3
Press the [Confirmation] key.
The selection is confirmed and the screen returns to the
<Setting> screen.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Setting> screen.
127
Start the procedure from the <Setting> - <Calibration setup> screen.
Warning
Regularly scheduled device
calibration is required.
Please contact the
nearest service center.