Optional Accessories - Konica Minolta CM-26dG Instruction Manual

Spectrophotometer Configuration Tool CM-CT1
This PC software is used to configure display conditions and
other settings as well as writing calibration data to
measurement instruments from a computer.
Visit https://www.konicaminolta.com/instruments/
download/software/color/cmct/index.html.
to download the tool.
Flat Type Battery Cover CM-A218
Used when the measurement surface of a target specimen is
lower than the bottom surface of the instrument.
Cleaning Cloth (* CM-26dG only)
Used to clean the calibration plate.
„ Optional Accessories
Stapler Type Target Mask CM-A268
Used for easily determining the measurement area when
performing color measurements.
Target Sheet
Used to change the target sheet opening according to the main
body target mask diameter. Attach the sheet to the stapler type
target mask for use.
For gloss
CM-A269
CM-26dG {
CM-26d —
CM-25d —
Hard Case CM-A267
Used for transporting the instrument and accessories.
Memo
May be included as a standard accessory in some regions.
Target Mask (MAV; w/ glass) CM-A277
Used to protect the inside of the specimen measuring port
when measuring in direct contact with powders or in an
environment where the inside of the specimen measuring port
may be affected by dust or liquid.
Memo
Cannot be used with the CM-26dG
Notes
When using this target mask, the measurement accuracy
will be decreased due to the influence of the glass
element. This must be taken into account when comparing
samples using the standard accessory target mask.
Replacement lithium-ion battery CM-A235
(RRC1120)*
This battery is a replacement for the standard lithium-ion battery.
(Included: {, Not included: —)
MAV (Ø8 mm) SAV (Ø3 mm)
CM-A270 CM-A271
— —
{ {
{ —
1
12