X85; Auto Print - Konica Minolta CM-26dG Instruction Manual

… Auto Print

„
Measurement results can be automatically printed for every measurement.
Notes
• The instrument must be connected to the printer in advance.
• The instrument can only output text to the printer. Note that even if spectral graphs, color difference graphs,
or other graphics are selected in the display type of the instrument, no graph will be printed.
Memo
Auto print is set to "OFF" when the instrument is shipped from the factory.
Operating Procedure
1
Use [▲] or [▼] to move the cursor to "Auto print",
and then press the [Confirmation] key.
The <Auto print> screen is displayed.
2
Use [▲] or [▼] to move the cursor to "ON", and then
press the [Confirmation] key.
The Auto Print function will turn ON, and printing will be
performed every time measurement is performed.
After the settings have been configured, the display will
return to the <Communication setup> screen.
Print Example 1
Display type set to "Spectral Graph"
123
Start the procedure from the <Setting> - <Communication setup> screen.
Ｓ／Ｎ １ ０ ０ ０ ０ １ ０ ３
ＳＡＭＰ Ｌ Ｅ ０ ０ １ １ ＰＡＳＳ
ＳＣ Ｉ
３ ６ ０ ｎｍ ２ ８． ８ ３ ５ ６ ０ ｎｍ ４８． ８ ０
３ ７ ０ ｎｍ ３ １ ． ０ ３ ５ ７ ０ ｎｍ ４ １ ． ９ ３
５ ３ ０ ｎｍ ６ ０． ７ ４ ７ ３ ０ ｎｍ ４ １ ． ９ ０
５ ４０ ｎｍ ５ ６． ２ ４ ７ ４０ ｎｍ ４０． ０ ２
５ ５ ０ ｎｍ ５ １ ． ０ ９
ＳＣ Ｅ
３ ６ ０ ｎｍ ２ ７． ７ ４ ５ ６ ０ ｎｍ ４４． ８ ２
３ ７ ０ ｎｍ ２ ９． ９ ３ ５ ７ ０ ｎｍ ４０． ９ ７
５ ３ ０ ｎｍ ５ ９． ６ ３ ７ ３ ０ ｎｍ ４０． ７ ５
５ ４０ ｎｍ ５ ５． １ ４ ７ ４０ ｎｍ ４ ７． ８ ３
５ ５ ０ ｎｍ ５ ０． ０ ６
２ ０ １ ８／０ ８／０ ８ １ ２ ： ３ ２ ： １ ４ ＭＡＶ
ＴＡＲＧ ＥＴ０ ０ ０ １ ＵＶ １ ０ ０％
Ｓ／Ｎ １ ０ ０ ０ ０ １ ０ ３
ＳＡＭＰ Ｌ Ｅ ０ ０ １ ２ ＰＡＳＳ
２／Ｄ６ ５ １ ０／Ｆ ２
ＳＣ Ｉ
ｄ Ｌ＊ −０． ４０ −０． ３ ９
ｄ ａ ＊ −０． １ ９ −０． １ ３
ｄ ｂ＊ −０． ０４ −０． ０ １
ｄ Ｅ＊ ａ ｂ ０． ４４ ０． ４ １
Ｍ Ｉ ０． ０ ６ ０． ０ ６
ＳＣ Ｅ
ｄ Ｌ＊ −０． ３ ７ −０． １ ０
ｄ ａ ＊ −０． １ ９ −０． １ ４
ｄ ｂ＊ ０． ０ ６ ０． ０４
ｄ Ｅ＊ ａ ｂ ０． ４ ２ ０． ４０
ｄＧＵ −０． ２ １ −０． ２ １
Ｍ Ｉ ０． ０ ６ ０． ０ ６
２ ０ １ ８／０ ８／０ ６ １ ３ ： ４０ ： ４ １ ＭＡＶ
ＴＡＲＧ ＥＴ０ ０ ０ １ Ｕ Ｖ １ ０ ０％