X85; Inserting The Battery - Konica Minolta CM-26dG Instruction Manual

… Inserting the Battery

„
This instrument can be powered from a lithium-ion battery, but use of the AC adapter or USB bus power is
recommended for extended periods of use. A lithium-ion battery installed in the instrument will be charged
whenever the AC adapter or USB bus power is used, regardless of whether the instrument is turned ON or OFF.
Notes
When using USB bus power, use a computer that meets IEC 62368-1 (Audio/video, information and
communication technology equipment - Part 1: Safety requirements) standards.
CAUTION
• Do not touch or short-circuit the terminals in the battery compartment. Doing so may damage the instrument.
Operating Procedure
1
Turn the instrument power OFF by pressing the
power button.
2
Slide open the battery cover on the bottom of the
instrument.
3
Rotate the battery retainer and insert the lithium-
ion battery. (Follow the indications in the battery
compartment to avoid confusing the battery
polarity.)
4
Slide the battery cover to close it.
31