Siemens SIMATIC IPC1047 Operating Instructions Manual page 96

Device maintenance and repair
7.4 Installing the software
Setting up partitions and integrating storage controllers unknown to the operating system
You can set up partitions during the installation process and integrate storage controllers that
are unknown to the operating system. To do so, select "Custom (advanced)" when prompted
for the installation type in the "Install Windows" installation program.
The following example illustrations show the available dialog windows.
Refresh
Load Driver
Drive options
(advanced)
96
Updating
Integration of controller drivers unknown to the operating system and required for
installation. Please read the information under "Information for systems with
RAID or AHCI controller" at the end of this section.
Display of additional functions that you can use to set up the data storage media,
see the following figure.
Operating Instructions, 07/2019, A5E45118479-AB
SIMATIC IPC1047