Updating The Operating System - Siemens SIMATIC IPC1047 Operating Instructions Manual

NOTICE
Risk of data loss
Files, user settings as well as existing authorizations and license keys are lost when a
restore is performed.
Back up your data before restoring.
1. Insert the provided USB stick into the device.
2. Restart the device.
3. Boot with the provided USB stick in the Boot mode you have set beforehand.
4. In the Windows® Boot Manager, select the option "Restore Microsoft Windows ..." and
confirm the selection.
The Restore program from Siemens starts after a few seconds.
5. Follow the instructions on the screen.
Note the following information.
Selecting the partitions to be restored
Option: "Restore complete system disk"
Use this option if you want to restore the complete factory settings of the device, including C
partitions: (System) and D: (Data).
Option: "Restore existing system partition only"
Use this option if you are want to restore only the C: (System) and the boot functionality. The
partition D: (Data) and all data stored there is retained.
7.4.3

Updating the operating system

Windows
The latest updates for the Windows operating system are available on the Internet at
Microsoft (http://www.microsoft.com/en-us) and on the device in the Start menu "Start > All
Programs > Windows Update > Check for updates".
Note
Before you install new drivers or operating system updates for Windows MUI versions,
configure the regional menu and dialog settings and the default English (US) language.
Other operating systems
Contact the corresponding manufacturer.
SIMATIC IPC1047
Operating Instructions, 07/2019, A5E45118479-AB
Device maintenance and repair
7.4 Installing the software
93