Markings And Symbols; Overview; Safety; Certificates, Approvals And Markings - Siemens SIMATIC IPC1047 Operating Instructions Manual

Markings and symbols

B.1

Overview

The following tables show all the symbols which may be found on your SIMATIC industrial
PC in addition to the symbols which are explained in the operating instructions.
The symbols on your device may vary in some details from the symbols shown in the
following tables.
B.2

Safety

Symbol Meaning
Warning, observe the supplied docu-
mentation.
Devices contain dangerous voltages
Follow the instructions
Only with drive cage type A with removable drives
1
B.3

Certificates, approvals and markings

The following table shows symbols relating to certificates, approvals and markings which may
be on the device. You can find more information in the operating instructions for your device:
Symbol Meaning
Approved for Australia and New Zea-
land
Approved for China
CE markings for European countries
EFUP (Environment Friendly Use
Period) marking for China
Test mark of the Underwriters La-
boratories
Approval for India
SIMATIC IPC1047
Operating Instructions, 07/2019, A5E45118479-AB
Symbol Meaning
Front door is closed.
The removable drive tray is locked
Front door is open
Symbol Meaning
Marking for the Eurasian Customs
Union
Test mark of Factory Mutual Re-
search
Marking of Federal Communications
Commission for the USA
Approved for Korea
Disposal information, observe the
local regulations.
B
1
117