Installing And Removing Expansion Cards - Siemens SIMATIC IPC1047 Operating Instructions Manual

6.3.3

Installing and removing expansion cards

Requirement
● Tx10 screwdriver
Procedure
Installation
1. Remove the screw
2. Insert the expansion card into the
3. Secure the expansion card with the
Removal
Proceed in the reverse order for the removal. In step 2, unlock the expansion card in the slot
before removing it.
SIMATIC IPC1047
Operating Instructions, 07/2019, A5E45118479-AB
③
at the rele-
vant slot and take out the associat-
ed slot bracket, similar to the figure.
slot in the arrow direction.
Slide the expansion card into the
slot as far as it will go without tilting
the card.
corresponding screw.
Expanding and assigning parameters to the device
6.3 Expansion cards
73