Removing The Throttle Bodies - Yamaha R1 Series 2015 Service Manual

EAS20070
THROTTLE BODIES

Removing the throttle bodies

F W F W
D D
3
4
2
8
Order
Rider seat
Front side cowling/Front panel/Side cover
bracket/Fuel tank cover
Fuel tank
Air filter case
1 Cross bar
2 Throttle position sensor coupler
3 Intake air pressure sensor coupler
4 Throttle servo motor coupler
5 Accelerator position sensor coupler
6 Primary injector coupler
7 Throttle cable
8 Intake solenoid vacuum hose
9 Fuel hose (throttle body to secondary injector)
10 Fuel hose (fuel tank to throttle body)
10
7
5
6
Job/Parts to remove
9
4.5 Nm (0.45 m
1
23 Nm (2.3 m
Q'ty
Refer to "GENERAL CHASSIS (1)" on page
4-1.
Refer to "GENERAL CHASSIS (2)" on page
4-7.
Refer to "FUEL TANK" on page 7-1.
Refer to "GENERAL CHASSIS (3)" on page
4-17.
1
1 Disconnect.
1 Disconnect.
1 Disconnect.
1 Disconnect.
4 Disconnect.
2 Disconnect.
1 Disconnect.
1
1
7-9
THROTTLE BODIES
10 Nm (1.0 m kgf, 7.2 ft
•
3.0 Nm (0.30 m kgf, 2.2 ft
•
kgf, 3.3 ft lbf)
• •
kgf, 17 ft lbf)
• •
Remarks
lbf)
•
(6)
LT
lbf)
•