Yamaha R1 Series 2015 Service Manual page 159

1. Air filter case
2. Secondary injector
3. Fuel hose (fuel rail to fuel rail)
4. Crankcase breather hose
5. Primary injector
6. Throttle body assembly
7. Intake solenoid vacuum hose (throttle body to
one-way valve)
8. Throttle cable (accelerator cable)
9. Throttle cable (decelerator cable)
10.Clamp
11.Fuel hose (fuel pump to fuel rail)
A. To one-way valve (Intake solenoid)
B. When installing the crankcase breather hose,
may apply silicone fluid to the crankcase
breather hose.
C. Connector color: Black
D. Projection on the throttle cable bracket
(accelerator cable side)
E. 5 mm (0.2 in) or less
F. Protector position: 26 mm (1.02 in)
G. Connector color: Orange
H. Point the end of the clamp to the right.
I. Install the clamp so that the bottom edge of
the clamp is 0–5 mm (0–0.2 in) from the hose
end.
J. To fuel pump
2-84
CABLE ROUTING