Yamaha R1 Series 2015 Service Manual page 250

Distance "a" (between the front
wheel sensor rotor and front
wheel sensor)
0.9–1.7 mm (0.035–0.067 in) (for
YZF-R1)
1.1–1.9 mm (0.043–0.075 in) (for
YZF-R1M)
TIP
Measure the distance between the front wheel
sensor rotor and front wheel sensor in several
places in one rotation of the front wheel. Do not
turn the front wheel while the thickness gauge is
installed. This may damage the front wheel sen-
sor rotor and the front wheel sensor.
Thickness gauge
90890-03180
Feeler gauge set
YU-26900-9
a
2
1
10.Install:
• Front brake calipers
• Front brake hose holder
Front brake caliper bolt
35 Nm (3.5 m·kgf, 25 ft·lbf)
Front brake hose holder bolt
6 Nm (0.6 m·kgf, 4.3 ft·lbf)
EWA13500
WARNING
Make sure the brake hose is routed properly.
1
2
4-33
FRONT WHEEL