Yamaha R1 Series 2015 Service Manual page 312

2. Tighten:
• Damper rod assembly
Front fork damper rod assembly
(for YZF-R1M)
68 Nm (6.8 m·kgf, 49 ft·lbf)
TIP
Tighten the damper rod assembly with the
damper rod holder "1".
Damper rod holder
90890-01504
Damper rod holder
YM-01504
3. Lubricate:
• Inner tube's outer surface
Recommended oil
YZF-R1M Suspension oil M1 or
Ohlins R&T 43
4. Install:
• Dust seal "1"
New
• Oil seal clip "2"
• Oil seal "3"
New
• Washer "4"
ECA19170
NOTICE
Make sure the numbered side of the oil seal
faces bottom side.
TIP
• Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag to protect
the oil seal during installation.
1
5. Install:
• Outer tube
6. Install:
• Washer
• Oil seal "1"
7. Install:
• Oil seal clip "1"
TIP
Adjust the oil seal clip so that it fits into the outer
tube's groove.
4-95
FRONT FORK (for YZF-R1M)
3
4
(to the inner tube)
(with the fork seal driver "2")
Fork seal driver
90890-01442
Adjustable fork seal driver (36–46
mm)
YM-01442
1
2