S8800 Server; Avaya-Provided Equipment; Customer-Provided Equipment - Avaya Aura System Platform Installing And Configuring

Installation Prerequisites for System Platform
Ensure that proper airflow is provided to components in the rack.
Do not step on or stand on any component when servicing other components in a rack.

S8800 Server

Avaya-provided equipment

Avaya provides the following equipment:
• Server and power cord
• Slide rails
• Cable management arm assembly
• Cable management arm stop bracket
• Cable management arm mounting bracket
• Cable management support arm
• Two 10–32 screws
• Four M6 screws
• Five small cable ties
• One large cable tie
• Other hardware as ordered, such as uninterruptible power source (UPS).

Customer-provided equipment

The customer must provide the following equipment:
• Standard 19–inch 4–post equipment rack that is properly installed and solidly secured.
The rack must meet the following standards:
- American National Standards Institute (ANSI) and Electronic Industries Association
(EIA) standard ANSI/EIA-310–D-92.
- International Electrotechnical Commission (IEC) 297
- Deutsche Industrie Norm (DIN) 41494
• Screws that come with the racks for installing the rails
• #2 cross-point (Phillips) screwdriver or 3/8 inch flathead screwdriver
• USB keyboard, USB mouse, and monitor must be available on-site for advanced
installation or troubleshooting.
18 Installing and Configuring Avaya Aura
™
System Platform April 2010