Front Panel Messages - Tektronix Phaser 740 User Manual

Front Panel Messages

Message
<color>:low
Energy Star Mode
Wake Up Menu
Error XX
Fuser:replace
Fuser Roll:replace
Imaging Unit:replace
Jam at <Location>
Open <door>
Main Charge Grid:replace
Media Tray:empty
MPT:<media type>
<--- ---> OK
Stopped:
Fuser Roll:replace
Stopped: replace <color>
Transfer Kit:replace
Action
The displayed color Toner Cartridge is running out; replace it soon.
The printer is in energy conservation mode. Press the Wake Up button on the front panel or send a print job
to bring the printer to Ready.
1 Press the Info button for problem information. Follow any steps listed.
2 If the failure persists, note the display's error number.
3 Look up the error number in the online topic "Error Codes" on the printer's CD-ROM or the web site at
www2.tek.com/merlin/tko.
Replace the Fuser soon.
Replace the Fuser Roll soon.
Replace the Imaging Unit soon.
A media jam has occurred at the indicated location. The second line of the message indicates the location
of the jam.
Replace the Main Charge Grid soon.
Refill the media tray. If your printer has a Lower Tray Assembly, the choices include Upper, Middle, or Lower.
Media has been loaded in the Multi-Purpose Tray; select that media type in the front panel. Press the arrows
to scroll to the appropriate media type; press OK. The printer waits a minute for you to select a media type at
the front panel prompt. After a minute, the job prints, using the previously selected media type.
Replace the Fuser Roll now.
The displayed color Toner Cartridge is empty; replace it now.
Replace the Transfer Kit (transfer roller and waste bin) soon.
20
Page
26
7
8