Table 3-4 Gmu 44 Recommended Crimp Tools; Table 3-3 Gsu 75 Recommended Crimp Tools - Garmin GSU 75 Series Installation Manual

Hand Crimping
Manufacturer
Military P/N M22520/2-01
Positronic
AMP 601966-1
Daniels
Astro
*Extracting the #18 and #20 contact requires that the expanded wire barrel be cut off from the contact. It
may also be necessary to push the pin out from the face of the connector when using an extractor due to
the absence of the wire. A new contact must be used when reassembling the connector.
Manufacturer
Military P/N
Positronic
AMP
Daniels
Astro
NOTE
Non-Garmin part numbers shown are not maintained by Garmin and consequently are
subject to change without notice.
NOTE
Extracting the #18 and #20 contact requires that the expanded wire barrel be cut off from
the contact. It may also be necessary to push the pin out from the face of the connector
when using an extractor due to the absence of the wire. A new contact must be used when
reassembling the connector.
190-01639-00
Rev. 6
The document reference is online, please check the correspondence between the online documentation and the printed version.

Table 3-3 GSU 75 Recommended Crimp Tools

18-20 AWG
Tool
Positioner
N/A
9507 9502-11
N/A
AFM8 K774
615717 N/A

Table 3-4 GMU 44 Recommended Crimp Tools

Hand Crimping Tool
M22520/2-01
9507
601966-1
AFM8
615717
Insertion/
Positioner
Extraction Tool*
M81969/1-04 M22520/2-09
M81969/1-04 9502-4
91067-1 601966-6
M81969/1-04
M81969/1-04 615725
22-24 AWG
Positioner
M22520/2-08
9502-5
601966-5
K13-1
615724
GSU 75 ADAHRS Installation Manual
22-28 AWG
Insertion/
Extraction
Tool
M81969/1-04
M81969/1-04
91067-1
K42 M81969/1-04
M81969/1-04
Insertion/Extraction
Tool
M81969/1-02
M81969/1-02
91067-2
M81969/1-02
M81969/1-02
Page 3-2
340095