Installing The Windows - Ricoh Aficio 401 Operating Instructions Manual

SETTING UP THE PRINTER
Installing the Windows Font Management and
Printer Screen Fonts
The PCL printer driver and screen fonts are each provided on a 3.5 inch
diskette. The procedure you use to install the PCL 5e printer driver and
screen fonts varies depending on your host computer operating system and
is provided for Windows 3.1 and Windows 95.
Note: To use the printer with a Macintosh computer, you must install the
PostScript driver.
Driver" section of this chapter for more information.
Installing the PCL 5e Printer Driver on Windows 3.1
Follow these steps to install the PCL 5e printer driver on your Windows 3.1
system:
1
Insert the "PCL Printer Driver for Windows 3.1" diskette in the 3.5 inch
disk drive on the host computer.
2
Close any applications that are currently running.
3
From the Program Manager, double-click on the Main icon and then
double-click on the Control Panel icon.
4
From the Control Panel window, double-click on the Printers icon. The
List of Printers window displays.
5
Click the [Add>>] button.
6
In the List of Printers window, scroll to the top of the list and select
Install Unlisted or Updated Printers.
7
Click the [Install] button. The Install Driver window displays.
8
From the Install Driver window, select the drive in which the installation
diskette is located and click [OK]. The Add Unlisted or Updated Printer
window displays listing "your printer name."
9
Click [OK] to complete the installation.
1-12
Refer to "Installing the Macintosh PostScript