Ricoh Aficio 401 Operating Instructions Manual page 45

USING THE CONTROL PANEL
2-6
When you are using the machine as a printer,
you can use the numeric keypad, the [Interrupt]
button located on the upper right side of the
Control Panel, and the [Clear] button located on
the lower right side of the Control Panel as fol-
lows:
Use these number keys as an alternate for entering
values into the fields on the menu screens that dis-
play. Using these keys is the same as using the keys
that display on the menu screens.
Use this as the decimal when entering values into the
fields on the menu screens that display. Using this
decimal point is the same as using the decimal point
that displays on the menu screen.
Use this key to accept the data you have entered on
the menu screens that display. Using this key is the
same as using the [Exit] key that displays on the
menu screens.
When you set the machine to the Share Mode, you
press this button to issue an interrupt command to the
controller. When this occurs, the current print job is
suspended after the current page prints and the ma-
chine switches to Interrupt Copy Mode.
message displays until printing of the current page is
complete.
When you press this button while the machine is in Inter-
rupt Copy mode, or if no copy operation occurs after this
button is pressed, an Interrupt Restart Command is
automatically issued and the machine returns to online
status. You cannot use this button when the status of
the machine is offline. When you attempt to do so, a
beep sounds to indicate that the operation cannot be
performed. You must change the status of the machine
to online before you can perform this task.
The alert