Stapling Setting Scree - Ricoh Aficio 401 Operating Instructions Manual

USING THE CONTROL PANEL
Stapling Setting Screen
When you press the [Change] button for the Stapling option, the Stapling
Setting screen displays.
Note: This Setting screen is available only when the finisher is installed.
You use this screen to specify whether you want stapling, and if so, where
you want the staple on the printed copy. The options are as follows:
None - specifies that you do not want stapling.
One Portrait - specifies that you want one staple placed at the top left
corner of the portrait page.
One Landscape - specifies that you want one staple placed at the top
left corner of the landscape page.
Two Portrait - specifies that you want two staples on the portrait page.
The staples are placed along the left side of the page when long edge
feed is used. The staples are placed along the top of the page when
short edge feed is used.
Two Landscape - specifies that you want two staples on the landscape
page. The staples are placed along the top of the page when long edge
feed is used. The staples are placed along the left side of the page
when short edge feed is used.
The default is None.
Note: After adding the new staples, several pages will be printed without
stapling.
2-32