Ricoh Aficio 401 Operating Instructions Manual page 13

$ WARNINGS:
• Only connect the machine to the power source described on the
>
inside front cover of this manual.
• Avoid multi-wiring
• Do not damage, break or make any modifications to the power
cord. Do not place heavy objects on it, pull it hard or bend it more
than necessary. These actions could cause an electric shock or
fire.
• Do not plug or unplug the power cord with your hands wet. Other-
wise, an electric shock might occur.
@
• Make sure the wall outlet is near the machine and freely accessi-
ble so that in event of an emergency it can be unplugged easily.
B
• Do not remove any covers or screws other than those specified in
this manual. Some parts of the machine are at a high voltage and
could give you an electric shock. Also, if the machine has laser
systems, direct (or indirect) reflected eye contact with the laser
beam may cause serious eye damage. When the machine needs
to be checked, adjusted, or repaired, contact your service repre-
sentative.
• Do not take apart or attempt any modifications to this machine.
There is a risk of fire, electric shock, explosion or loss of sight. If
the machine has laser systems, there is a risk of serious eye
damage.
• If the machine looks damaged or breaks down, smoke is coming
C
out, there is a strange smell or anything looks unusual, immedi-
ately turn off the main and AC switches then unplug the power
cord from the wall. Do not continue using the machine in this
condition. Contact your service representative.
• If metal, liquid or foreign matter falls into the machine, turn off the
main and AC switches, and unplug the main power cord. Contact
your service representive. Do not keep using the machine with a
fault or defect.
>
• Do not put any metal objects or containers holding water
(e.g.vases, flowerpots, glasses) on the machine. If the contents
fall inside the machine, a fire or electric shock could occur.
D
• Do not incinerate used toner or toner containers. Toner dust might
ignite when exposed to an open flame. Dispose of the used toner
containers according to local regulations for plastics.
D
• Do not incinerate the photoconductor unit. Toner dust might ignite
when exposed to open flame. Dispose of the used photoconduc-
tor unit according to local regulations for plastics.
SAFETY INFORMATION
v