Paper Tray Setting Screen
When you press the [Change] button for the Paper Tray option, the Paper
Tray Setting screen displays.
You use this screen to specify the paper feed tray you want to use when
the paper tray is not specified by your application. Only the installed Trays
will display. The options are as follows:
Auto
Bypass Tray
LCT
Tray 1
The default is LCT.
The selection you make for this option goes into effect before the selection
you made for the Page Size option. Therefore, when you want the Page
Size option to take precedence, you must set this Paper tray option to Auto.
USING THE CONTROL PANEL
Tray 2
Tray 3
Tray 4
2-27