Ricoh Aficio 401 Operating Instructions Manual page 11

"O produto está em conformidade com os requistos de Directiva EMC
89/336/EEC e a Directiva sobre baixa-voltagem 73/23/EEC."
"Tæki petta er framleitt í samræmi vid kröfur í Tilskipun nr.
89/336/EBE um rafsegulsvidssamhæfi og Tilskipun nr. 72/23/EBE um
rafföng sem nutud eru innan ákvedinna spennumarka.."
"Tuote on EMC direktiivin 89/336/EEC ja heikkovirtadirektiivin
72/23/EEC mukainen."
EMC: CISPR-22:1985/EN 55022:1988 class B*
*Note:
This product contains Network Interface Card (NIC) options. When using the
NIC option, the product meets the requirements of EN55022 class A.
Operator Safety:
This copier is considered a CDRH class I laser device, safe for office/EDP
use. The Copier contains a 15-milliwat, 760-800 nanometer wavelength,
GaAIAs laser diode. Direct (or indirect reflected) eye contact with the laser
beam may cause serious eye damage. Safety precautions and interlock
mechanisms have been designed to prevent any possible laser beam
exposure to the operator.
Laser Safety:
The Center for Devices and Radiological Health (CDRH) prohibits the repair
of laser-based optical unit in the field. The optical housing unit can only be
repaired in a factory or at a location with the requisite equipment. The laser
subsystem is replaceable in the field by a qualified Customer Engineer. The
laser chassis is not repairable in the filed. Customer engineers are there-
fore directed to return all chassis and laser subsystems to the facotry or
service depot when replacement of the optical subsystem is required.
Declaração de conformidade
Samræmisyfirlÿsing
Yhdenmukaisuusilmoitus
SAFETY INFORMATION
iii