Ricoh Aficio 401 Operating Instructions Manual page 92

Field Parameter
Print On
TrueType Off
as Graphics
Reverse On
Print Order Off
Job On
Separation Off
Description
Allows you to specify whether you want to print
TrueType fonts as graphics. This field is only active
when you specify Raster as the Graphics Mode and
High as the Graphics Quality.
The default value is Off.
Allows you to specify whether you want to use the
Reverse Print Order feature, which delivers the
printed output face-up in the correct order.
When you enable this feature, the host input data is
rasterized and stored in the order received. The
data is then retrieved from the HDD and printed in
reverse order so that the output is delivered face-up
in the correct page sequence from page 1 to the
end.
When you request multiple copies, the output
consists of sets of copies in the correct page
sequence (for example, three sets each in 1,2,3,4,5
page order).
The default value is On.
Allows you to specify whether you want to use Job
Separation, indicating that you want the machine to
automatically separate the print jobs.
The separation is implemented either as a
mechanical offset, or with a sheet of paper,
depending on the type of trays installed on the
machine.
When a mechanical offset is used, the finisher
activates a jogger mechanism that moves the shift
tray slightly to the right or to the left for each job.
This makes it easy to determine where the end of a
set or job occurs. Job separation is especially
useful for separating collated jobs.
The default value is Off.
USING THE PRINTER DRIVERS
3-5