Ricoh Aficio 401 Operating Instructions Manual page 107

USING THE PRINTER DRIVERS
Field Parameter
Staple
(cont.)
Auto Tray On
Switching Off
st
Printer 1
nd
Output Tray 2
rd
3
Edge On
Smoothing Off
Input Paper None
Device 1000-sheet Tray Unit
1500-sheet Tray Unit
3-20
Output Bin
Output Bin
Output Bin
Description
Two Portrait specifies that you want two
staples on the portrait page. The
staples are placed along the left side of
the page when long edge feed is used.
The staples are placed along the top of
the page when short edge feed is used.
Two Landscape specifies that you want
two staples on the landscape page.
The staples are placed along the top of
the page when long edge feed is used.
The staples are placed along the left
side of the page when short edge feed
is used. This feature is available only
when the optional stapler is installed.
The default value is Off.
Allows you to specify whether you want
to use Auto Tray Switching. When you
enable Tray Switching, the printer
switches to an alternate paper tray
when the current tray is empty.
The default value is On.
Allows you to specify which bin you
want to use.
The default value is 2
Allows you to specify whether you want
to use Edge Smoothing. The default
value is On.
Allows you to specify that you want to
use an optional input tray when one is
installed.
The default value is None.
nd
output Bin.