Personality Setting; Baud Rate Setting - Ricoh Aficio 401 Operating Instructions Manual

USING THE CONTROL PANEL
Personality Setting Screen
When you press the [Change] button for the Personality option, the Person-
ality Setting screen displays.
You use this screen to set the page description language you want to use
for the print jobs received through the serial port.
follows:
Auto - specifies that you want the page description language used for
the print jobs to switch automatically based on the data received by the
serial port.
PCL - specifies that you want to use the PCL page description lan-
guage for the print jobs received by the serial port.
PostScript - specifies that you want to use the PostScript page de-
scription language for the print jobs received by the serial port.
The default is Auto.
Baud Rate Setting Screen
When you press the [Change] button for the Baud Rate option, the Baud
Rate Setting screen displays.
You use this screen to set the baud rate for the serial port in bits per
second (bps). The baud rate is a unit used to measure the data transmis-
sion speed. The options are as follows:
1200
2400
4800
The default is 9600 bps.
Note: You must set the baud rate for the serial port to the same baud rate
set at the host.
2-38
The options are as
9600
19200
38400