Ricoh Aficio 401 Operating Instructions Manual page 134

Field Parameter
Job On
Separation Off
Staple Off
One
Portrait
One
Landscape
Two
Portrait
Two
Landscape
st
Print 1 Output Bin
nd
Output Tray 2
rd
3
Description
Allows you to specify whether you want to use the
job separation feature provided by the optional
finisher.
The separation is implemented either as a
mechanical offset, or with a sheet of paper,
depending on the type of trays installed on the
machine.
When a mechanical offset is used, the finisher
activates a jogger mechanism that moves the shift
tray slightly to the right or to the left for each job.
This makes it easy to determine where the end of
a set or job occurs. Job separation is especially
useful for separating collated jobs.
This option is available only when the optional
finisher is installed.
The default value is Off.
Allows you to specify whether you want to use
the stapling option, and if so, where you want to
staple the printed output.
None species that you do not want stapling. One
Portrait specifies that you want one staple placed
at the top left corner of the portrait page.
One Landscape specifies that you want one staple
placed at the top left corner of the landscape page.
Two Portrait specifies that you want two staples
on the portrait page. The staples are placed along
the left side of the page when long edge feed is
used. The staples are placed along the top of the
page when short edge feed is used.
Two Landscape specifies that you want two
staples on the landscape page. The staples are
placed along the top of the page when long edge
feed is used. The staples are placed along the
left side of the page when short edge feed is
used.
This feature is available only when the optional
stapler is installed.
The default value is Off.
Allows you to specify an output tray.
Output Bin The default value is 1
Output Bin
USING THE PRINTER DRIVERS
st
Output Bin.
3-47