Output Setting Screen - Ricoh Aficio 401 Operating Instructions Manual

USING THE CONTROL PANEL

Output Setting Screen

When you press the [Change] button for the Output option, the Output
Setting screen displays.
You use this screen to specify the output operation you want to use. For
the 500 sheet tray or the finisher, the options are as follows:
Reverse - specifies that the output is face-up and in ascending page
order. When you select this option, the host input data is rasterized
and stored in the order received. The data is then retrieved from the
HDD and printed in reverse order so that the output is delivered face-up
in the correct page sequence from page one to the end. When multiple
originals are requested, the output consists of sets of originals in the
correct page sequence (for example, three sets each in 1,2,3,4,5 page
order).
Normal - specifies that the data is printed immediately in the order
received by the printer.
speed printer performance. When you select this option, the host input
data is rasterized and printed immediately, so that the output is in the
sequence received by the printer.
quested, the output consists of sets of originals of each page (for exam-
ple, three sets each in 1,1,1; 2,2,2; 3,3,3 page order).
Duplex - specifies that the data is printed on both sides of each page,
face-up, and in ascending page order. When you select this option, the
host input data is rasterized. The odd numbered pages are stored in
the HDD and the even numbered pages are printed and stacked in the
duplex tray. When this process is complete, the odd numbered pages
are retrieved from the HDD and printed on the reverse side of the
stacked even numbered pages in reverse order, so that the output is
delivered face-up in the correct page sequence from page 1 to the end.
You can not print more than 50 originals at one time in this mode.
The default is Reverse.
2-30
You use the Normal option to obtain high
When multiple originals are re-