Ricoh Aficio 401 Operating Instructions Manual page 123

USING THE PRINTER DRIVERS
Field Parameter
Staple Off
1 Portrait
1 Landscape
2 Portrait
2 Landscape
Output Copy Tray
Paper 3-bin Sorter
Device Finisher
Edge On
Smoothing Off
Input Paper None
Device 1000-sheet Tray
Unit
1500-sheet Tray
Unit
3-36
Description
Allows you to specify whether you want to use
the stapling option, and if so, how many
staples you want and where you want to staple
the printed output.
Off species that you do not want stapling.
One Portrait specifies that you want one staple
placed at the top left corner of the portrait
page.
One Landscape specifies that you want one
staple placed at the top left corner of the
landscape page.
Two Portrait specifies that you want two
staples on the portrait page. The staples are
placed along the left side of the page when
long edge feed is used. The staples are placed
along the top of the page when short edge
feed is used.
Two Landscape specifies that you want two
staples on the landscape page. The staples
are placed along the top of the page when
long edge feed is used. The staples are placed
along the left side of the page when short
edge feed is used.
This feature is available only when the optional
stapler is installed.
The default value is Off.
Allows you to specify which output bin you
want to use when an optional output device is
installed. The options contained in the list are
based on the optional output devices that are
available on the machine.
The default value is Copy Tray.
Allows you to specify whether you want to use
Edge Smoothing. The default value is On.
Allows you to specify that you want to use an
optional input tray when one is installed.
The default value is None.