Accessing And Using - Ricoh Aficio 401 Operating Instructions Manual

[Serial Menu] - accesses the Serial Menu, allowing you to specify the
serial connection options you want to use.
[Network Menu] - accesses the Network Menu, allowing you to specify
the network timeout setting you want to use. This selection displays
only when you have the PostScript option available on the machine.
[Configuration Menu] - accesses the Configuration Menu, allowing you
to specify the printer configuration options you want to use.
[Test Menu] - accesses the Test Menu, allowing you to request the
tests you want to perform to verify the functionality of the printer.
[Maintenance Menu] - accesses the Maintenance Menu, allowing your
service representative to perform maintenance operations, such as for-
matting the system, and to add or change password codes. This menu
is password protected and is used only by your service representative.
[Reset Menu] - accesses the Reset Menu, allowing you to reset the
configuration values specified for the printer.
Note Some of the menus listed above may not be available on the Setup
menu depending on the options installed on your machine. For exam-
ple, when you do not have the PostScript option available on your
machine, the [PostScript Menu] button does not display.
Accessing and Using Menus
To access a menu from the Setup Menu, press the button that corresponds
to the menu you want to access. There are two types of Setting screens
that display, one contains selections for the option you choose, the other
allows you to use a numeric keypad to specify values for the field.
The current value for each option displays in the box located to the right of
the option on the menu screen. To change the value for an option, press
the [Change] button located beside the option you want to change. The
Setting screen for that option displays.
USING THE CONTROL PANEL
2-19